Click-lock seam is a modern standing seam roofing technology with a factory-formed panel lock. Unlike traditional double-lock seams formed on site, click-lock panels come with a pre-formed locking mechanism that significantly speeds up installation and increases joint reliability. Foreest installs click-lock seam roofing in Kyiv and the region with a watertightness guarantee.
What Is Click-Lock Seam Roofing
Click-lock seam panels have a factory-formed locking profile on two opposite edges. During installation, one panel's lock „clicks" into the adjacent panel's lock — without additional crimping tools. This provides:
- Maximum installation speed — 2–3× faster than traditional seam
- Identical joints across the entire roof — no human error factor
- No additional tooling needed — no seaming machine required
- Ability to remove individual panels without disturbing neighbors
Advantages of Click-Lock Seam
- Watertightness. Factory locks ensure tight joints without gaps.
- Durability. 50–70 year service life.
- Fast installation. Reduces work time by 30–40% vs. traditional seam.
- Low minimum pitch. Can be installed from 7°.
- Repairability. Individual panels can be replaced without touching adjacent ones.
- Aesthetics. Straight, clean lines — premium roof appearance.
Click-Lock Installation Technology
1. Substrate Preparation
We check the sheathing for evenness, absence of protrusions and knots. Click-lock requires a level surface for proper lock engagement.
2. Panel Installation
Panels are laid along the slope from eaves to ridge. The lock engages by hand or light pressure. Attachment to sheathing is via clips — no drilling through the panel.
3. Ridge and Accessory Installation
The ridge is installed over the top panel locks. Wall and chimney junctions are sealed with special strips.
4. Quality Control
We verify all locks are intact, no panel deformations, and all junctions are sealed.
Where Click-Lock Is Ideal
- Premium private homes and cottages
- Complex multi-level roofs with valleys
- Low-slope and flat roofs (from 7°)
- Roof reconstruction with long-life replacement
- Commercial projects where time is critical
Click-Lock Installation Prices
| Work Type | Price |
|---|---|
| Click-lock on ready sheathing | from 700 UAH/m² |
| Full package (sheathing + click-lock) | from 1000 UAH/m² |
| Ridge and accessory installation | from 180 UAH/linear m |
FAQ
What is the difference between click-lock and traditional seam?
Traditional seam is formed on-site with a seaming machine. Click-lock has a factory-formed lock — faster and simpler to install, with equally strong joints.
Can click-lock be installed on an old frame?
Yes, provided the sheathing is level, dry, and strong. We inspect and repair the substrate if needed before installation.
What materials are used for click-lock?
Galvanized steel with polymer coating (polyester, pural), aluminum, copper. Panel thickness typically 0.5–0.7 mm.
Order click-lock seam installation. Leave your phone number — we'll calculate the cost and timeline for your roof.